PEI Ultem 9085 Filament

PEI Ultem 9085 Filament The 3D4MAKERS PEI Ultem 9085 Filament will be delivered in a vacuum packing with silica gel in our recyclable box. The spool is made of polycarbonate and can withstand temperatures of 120°C. Diameter: 1,75mm Gewicht: 750 gram
SKU: 500.003.001
Manufacturer part number: PEI90-0000-175-750-3D4M
€ 237.00 incl tax
excluding shipping
Technical information:
 
 

Polyether Imide (PEI) Ultem 9085 is an amorphous, high performance thermoplastics with a glass transition temperature (Tg) of 186 °C. This material features superior mechanical performance, flame retardancy (UL 94-VO rated) and strength-to-weight ratio. 

The 3D4MAKERS PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PEI Filament particularly suitable for usage in FDM and FFF 3D printers. 

 

 

Measurements & Tolerance

SizeDiameter tolerance roundness
 

1,75 mm Filament

+/- 0,05mm

97%

 

2,85 mm Filament

+/- 0,10mm

97%

 
Moisture content
 
< 0,05%
 

 

Physical properties

DescriptionValueTest method
Density 1,34 g/cm3 ASTM D 792

 

Mechanical properties

DescriptionValueTest method
Tensile Modulus, 5mm/min 3440 MPa ASTM D 638
Tensile Stress, yld, 5mm/min 84 MPa
 
ASTM D 638
Impact strength Notched Izod 115 J/m ASTM D 256

Printer settings

DescriptionValue
Printer nozzle temperature 350 - 380°C
Heated bed temperature 120 - 160°C
Adhesion Magigoo HT on glass or a PEI Sheet
Drying recommendations 120°C, minimal 4 hours

 

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. We recommend to use a closed system.

When the 3D printer is not being used it is important to keep the 3D4MAKERS PEI Filament in a bag and stored in a cool, dry and dark place until it is used again.

 

Safety information

REGULATION (EC) No. 1272/2008. According to EC regulations this product is not classified as dangerous for supply/use.

Classification according to EU-directive 67/548/EEC or 1999/45/EC. According to EC criteria this product is not classified as dangerous for supply/use.

 

COMPOSITION AND INFORMATION ON THE COMPONENTS

 

 

CAS-Nr./EG-Nr./Index

REACH Nummer

Bestanddeel

Classificatie        Verordening         (EG) Nr. 1272/2008

(EG) Nr. 67/548/EEC

CAS-Nr. 61128-46-9

EG-Nr. Polymeer

  ----------

Polyetherimide

Not classified

 

Exposure controls / Personal protection

Local Exhaust Ventilation at the workplace or on the 3D printer is required.

Legally Obliged Information

1 Specific safety, health and environmental regulations and legislation for the substance or mixture.

Classification of the substance or mixture

The substance is not classified as dangerous according to Regulation (EC) no 1272/2008 (CLP/GHS) and Directive 67/548/EEC.

2 Chemical safety assessment: Does not apply

RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals).

Recommended restrictions

Do not use in medical applications involving permanent implantation in the human body.

The PEI Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.

Environmental information

Plastic waste can damage the environment. 3D misprints must be separated with plastic waste together with the Filament reel. 3D4MAKERS is developing a return system for  3D misprints and the Filament reel.

Product tags